HadleyHUSH is a single-stud partition incorporating Hadley resilient bars on one side or both for added acoustic performance, whilst minimising the overall width of the partition. Lightweight and easy to install, this drylining system will help reduce installation time on site whilst giving you the confidence that the system will achieve your required acoustic performance.
Peace of mind performance
- Third party accredited tested to relevant British and European Standards
- Fully CE marked
- Ability to specify using any of the top three plasterboard manufacturers
- Full technical support, site queries, and value engineering solutions.
| KEY INFORMATION | |
|---|---|
| ACOUSTIC | 54 dB Rw TEST No.: BTC15537A-H15552A 63 dB Rw TEST No.: BTC15537A-H15552A |
| FIRE | 60:60 minutes TEST No.: WF501424 120:120 minutes TEST No.: BTC16459F |
| COLD STATE MAX HEIGHT | Heights vary from 4100mm to 4900mm (one side res) or 3200mm to 4000mm (both side res) |
| OVERALL WIDTH | 137mm – 162mm |
Components
- Hadley Track (size to suit specification)
- Hadley Resilient Bars
- Plasterboard (approved 3rd party component – to suit specification)
- Insulation (approved 3rd party component – to suit specification)
- Fixings
- Intumescent and acoustic sealant
- Hadley Angle (if required)
- Materials for taping and jointing
SPEC
One-sided
Download HadleyHUSH DetailsSPEC
Two-sided
Download HadleyHUSH DetailsOur experts are here to help you
If you have design or performance challenges you’re looking to overcome, the Hadley technical team are on hand to support you throughout your project.