HadleySHAFT shaftwall gives you options for building a fire rated partition when you only have access to build from one side. Primarily used around risers and lift shafts, HadleySHAFT is built using Hadley I Studs with the inner layer lined using a suitable 19mm Coreboard, secured in place using Hadley Shaft Core Angle Brackets.
Peace of mind performance
- Third party accredited tested to relevant British and European Standards
- Fully CE marked
- Ability to specify using any of the top three plasterboard manufacturers
- Full technical support including full K10 specifications, site queries, and value engineering solutions.
| KEY INFORMATION | |
|---|---|
| ACOUSTIC | 42 dB Rw TEST No.: BTC19956A-H19956DA 47 dB Rw TEST No.: BTC19956A-H19956HA |
| FIRE | 30:30 minutes TEST No.: WF501438–WF501434 120:120 minutes TEST No.: EUI-23-B-000615–EUI-23-B-000614 |
| COLD STATE MAX HEIGHT | 4600mm – 8000mm |
| OVERALL WIDTH | 74.5mm – 193mm |
Components
Hadley I Stud (size to suit specification)
Hadley Track (size to suit specification)
Hadley Shaft core angle bracket
19mm Coreboard e F Plasterboard (approved 3rd party component – to suit specification)
Insulation (approved 3rd party component – to suit specification)
Fixings
Intumescent and acoustic sealant
Hadley Angle (if required)
Materials for taping and jointing
Our experts are here to help you
If you have design or performance challenges you’re looking to overcome, the Hadley technical team are on hand to support you throughout your project.